Call (562) 685-9090

Home › Guides › How to identify scrap metal

How to identify scrap metal: magnet, color, weight and markings

By SoCal Scrap Metal Buyer · Updated

How to identify scrap metal comes down to a few checks you can do with a magnet, good light, a scale and the paperwork. No single check is proof, but together they tell you which pile a piece belongs in and whether it is one of the metals we buy, which is everything except iron and steel.

A gloved hand holds a magnet to a brass valve; a magnet clings to a steel bolt beside a copper elbow and an aluminum block

The magnet check, and the metals that fool it

Start with a strong magnet, because it finds the metals we do not buy. OSHA's scrap recycling guidance says ferrous metals are magnetic and are often collected in scrap yards by a large crane-mounted electromagnet. Iron and steel are the ferrous metals, and they are the ones we turn down.

The catch is that iron is not the only magnetic metal. Georgia State University's HyperPhysics says iron, nickel, cobalt and some rare earths show ferromagnetism. The bulletin for Nickel 200, commercially pure nickel at 99.6%, lists magnetic properties among its useful features. A piece that grabs the magnet hard can be nickel or cobalt, which we buy, and not steel at all.

Alloys built on nickel often barely respond. Their makers list permeabilities at 200 oersted of 1.010 for Inconel 600, 1.0006 for Inconel 625 and 1.0013 for annealed Inconel 718, and HyperPhysics explains that a relative permeability of 1 means no magnetization at all. Monel 400 sits on the line: its bulletin puts its Curie temperature at 70 to 120 F, so "some heats will be magnetic at room temperature and others not."

Many other metals we buy hardly respond at all. A NIST paper gives titanium a relative permeability of 1.0002 and copper 0.99998, HyperPhysics lists aluminum and tungsten among paramagnetic materials, and a 2023 paper calls tantalum nonferromagnetic. The magnet tells you what a piece is not more often than what it is.

Sources: OSHA 3348: metal scrap recycling; HyperPhysics (Georgia State University): ferromagnetism; HyperPhysics (Georgia State University): magnetic properties; Special Metals: Nickel 200 bulletin; Special Metals: INCONEL alloy 600 bulletin; Special Metals: INCONEL alloy 625 bulletin; Special Metals: INCONEL alloy 718 bulletin; Special Metals: MONEL alloy 400 bulletin; NIST paper on MRI artifacts (titanium and copper permeability); HyperPhysics (Georgia State University): magnetic properties table; Biomimetics (2023): tantalum in medicine (PMC9944482).

Color and surface: look at a clean edge

USGS says skilled sorters "do a preliminary sort on the basis of shape, object recognition, color, and weight of the scrap items." Color is the first thing you notice and the easiest to misread, because surfaces hide things.

  • Brass under chrome: ReMA's cocks and faucets grade is mixed red and yellow brass, including chrome or nickel-plated pieces, so a shiny faucet can be brass underneath. The brass vs bronze guide goes further.
  • Gold-colored inserts: ITIA notes that a TiN coating is gold-colored, so a gold-looking cutting insert may be coated carbide, not brass.
  • Gray metals: USGS describes tantalum as dark blue-gray, niobium as lustrous gray and cobalt as silvery-gray, which is why color alone will not sort the exotics.

Paint, plating, oxide and grime all hide the base metal. Look at a cut end or a drilled hole, or scratch an out-of-the-way spot with a file. Do not grind; the section on spark tests explains why.

Sources: USGS Circular 1196-A-M: metal recycling in the United States; ReMA ISRI Specifications (July 2026); ITIA: cemented carbides; USGS Professional Paper 1802-M: niobium and tantalum.

Weight in the hand sorts the exotics

Density separates more metals than color does. Hold a piece you know, such as an aluminum offcut or an iron bolt of about the same size, in the other hand, or weigh both on a kitchen scale. Figures in g/cm3 are from NIST and the Royal Society of Chemistry, with the ASTM B777 heavy alloy range from a Sandia presentation of that table:

Metalg/cm3Against iron
Aluminum2.699about one third
Titanium4.506a little over half
Iron (we do not buy it)7.874the baseline
Niobium8.57about 9% heavier
Molybdenum10.2about 1.3 times
Tantalum16.4about 2.1 times
Tungsten heavy alloy16.85 to 18.85about 2.1 to 2.4 times
Tungsten19.3about 2.5 times

Two results do most of the work. Titanium feels light for its size, a little over half the weight of the same piece of iron. Anything twice as heavy as iron or more belongs on the tungsten, tantalum and heavy alloy shelf, and the tungsten, molybdenum and tantalum and niobium pages go deeper.

Sources: NIST: densities of the elements (X-ray attenuation tables); Royal Society of Chemistry: titanium; Royal Society of Chemistry: niobium; Royal Society of Chemistry: molybdenum; Royal Society of Chemistry: tantalum; Royal Society of Chemistry: tungsten; Sandia National Laboratories presentation of the ASTM B777 table (OSTI).

A floor scale with a box of sorted brass and copper scrap on it

Stamps, labels and paperwork

The best identification is written on the metal or on the paper that came with it: stamped or etched alloy names and numbers, heat numbers, part numbers, mill certificates and job travelers. What the common markings mean:

  • Titanium: ASTM B265 covers Grades 1 through 4 as unalloyed titanium, and Grade 5 as UNS R56400, titanium with 6 percent aluminum and 4 percent vanadium.
  • Aluminum: in the Aluminum Association's wrought alloy system, copper is the principal alloying element in the 2xxx series, silicon and magnesium in 6xxx, and zinc in 7xxx; 2024 and 7075 are well-known aircraft alloys.
  • Nickel and cobalt alloys: a cert may give a UNS number instead of a trade name. Hastelloy X is UNS N06002, and Haynes 25, also called L-605, is UNS R30605.
  • Beryllium copper: C17200, which the Copper Development Association lists as a wrought copper beryllium alloy.

Markings matter at the sale, too. California's AB 476 (2025), as the Senate Public Safety Committee described it, adds engraved or etched marks and serial numbers to the purchase record, so photograph any you find.

Sources: ASTM B265 scope (ASTM); Aluminum Association: alloy designation standards; Haynes International: HASTELLOY X datasheet; Haynes International: HAYNES 25 datasheet; Copper Development Association: C17200; Senate Public Safety Committee analysis of AB 476 (2025).

Spark tests and XRF: what they are, and why not to grind

The trade has checks beyond the eye and the hand. USGS describes further tests such as response to a magnet, the spark pattern made when the alloy is ground on an abrasive wheel, and chemical or physical analysis by various methods. They appear here as general knowledge, not as steps to try.

Portable XRF (X-ray fluorescence) is the handheld analyzer you may have seen. Natural Resources Canada training material says it works on solids, turnings, powders and liquids with little or no sample preparation, but has great difficulty detecting elements lighter than silicon, including lithium, beryllium, boron and carbon. EPA Method 6200 likewise lists beryllium, magnesium and aluminum among the light elements field portable XRF cannot detect.

Spark testing means grinding the metal and reading the sparks. Skip it. Grinding makes dust, and some metals in this guide are a dust hazard: the National Toxicology Program lists cobalt-tungsten carbide powders and hard metals as reasonably anticipated to be a human carcinogen, and OSHA says workers exposed to beryllium are at risk of chronic beryllium disease and lung cancer.

Sources: USGS Circular 1196-A-M: metal recycling in the United States; Natural Resources Canada portable XRF training (UC Berkeley copy); EPA Method 6200 (field portable XRF); National Toxicology Program: cobalt-tungsten carbide profile; OSHA: beryllium standard small entity compliance guide.

Non ferrous scrap metal, and what we buy once you know

We buy every metal except iron and steel, exotics and alloys first: Inconel and other superalloys, Hastelloy, Monel and other nickel alloys, titanium, cobalt alloys, tungsten, molybdenum and tantalum and niobium, then copper, insulated wire, brass and bronze, aluminum and lead, zinc and tin. We do not buy catalytic converters.

Nonferrous also has a narrower legal meaning in California. Business and Professions Code 21608.5 defines nonferrous material as copper, copper alloys, stainless steel or aluminum and attaches stricter ID, photo and thumbprint rules to it, while the general record rules cover all ferrous and nonferrous scrap metals and alloys. The California scrap metal law guide explains both.

When you cannot tell, do not guess. Photograph the piece next to something for scale, note its weight and where it came from, and send it with the rest of the lot through the quote form. Pickup is free anywhere in Southern California.

Sources: AB 1508, Chapter 531, Statutes of 2012 (Bus. & Prof. Code 21608.5); California Attorney General: secondhand dealer laws (2012 compilation); California Attorney General Information Bulletin 2025-DLE-12.

Common questions

Is non ferrous scrap metal anything a magnet will not pick up?

Not quite. Nickel and cobalt are magnetic, and many of their alloys barely respond. Use the magnet to find iron and steel, which we do not buy, then sort the rest by weight, color and markings.

Can I identify titanium without grinding it?

Usually. Titanium feels light for its size and hardly reacts to a magnet, and its grade may be on the paperwork. Weigh it against a piece you know and read the certs.

What if a piece is plated or painted?

Look at a cut end, a drilled hole or a file scratch in an out-of-the-way spot. Chrome can hide brass and a coating can hide carbide. Photograph what you find.

What if I still cannot tell what a piece is?

Add it to the lot anyway, with a photo next to something for scale and a note on where it came from. If it turns out to be iron or steel, we will tell you.

Should I spark test scrap at home?

No. Grinding makes dust, and the dust from carbide and beryllium copper is a health hazard. A magnet, a scale, a file scratch and the paperwork are enough to sort a lot for a quote.

Have metal to sell?

Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.

Call nowGet a quote