Call (562) 685-9090

Home › Metals we buy › Aluminum

Aluminum scrap, grade by grade: extrusion, sheet, cast and wheels

Your aluminum scrap price depends on which aluminum you have: extrusion, sheet, castings and wheels are separate grades, and the alloy matters inside each. We buy all of it, quote from your photos and a rough weight, and pick up free anywhere in Southern California.

Aluminum extrusions, sheet offcuts, cast housings and plain alloy wheels on a pallet

Aluminum alloys by series

Wrought aluminum carries a four-digit alloy number under the system the Aluminum Association set up and the US adopted in 1954, which now counts more than 530 registered active compositions. The first digit names the main alloying element.

SeriesMain additionWhere the Aluminum Association places it
1xxxNone: 99% or purerPower transmission lines
2xxxCopper2024, perhaps the most widely known aircraft alloy
3xxxManganese3004 beverage can bodies
4xxxSiliconWelding wire and brazing alloys
5xxxMagnesium5182 can lids
6xxxSilicon and magnesiumArchitectural and structural extrusions; 6061 in truck and marine frames
7xxxZinc7050 and 7075, widely used in aircraft

Castings use a three-digit system; Missouri S&T course notes list the 3xx family as aluminum-silicon-copper or aluminum-magnesium-silicon.

The aircraft alloys are worth knowing here: EDD counted 53,000 aerospace product and parts manufacturing jobs in Los Angeles County in September 2026. Keep 2024 and 7075 offcuts away from 6061 and 6063.

Sources: Aluminum Association, alloy standards; Missouri S&T course notes, aluminum alloy types; California EDD, Los Angeles County employment (CES), September 2026.

Extrusion and sheet

Extrusion is aluminum pushed through a shaped die, the way window frames and rails are made. The Aluminum Association puts it plainly: "Extrusion products from the 6xxx series are the first choice for architectural and structural applications." ReMA grades it closely.

  • New production extrusion (Tata): one alloy, typically 6063. Anodized is acceptable; painted material or other alloys must be agreed.
  • 10/10 extrusion (Toto): new and old 6063 with up to 10% painted and 10% 6061 and no other alloys, free of zinc corners, iron attachments, felt, plastic, paper, cardboard and thermo break, the plastic strip inside many frames.
  • Old extrusion (Tutu): one alloy, typically 6063, 6061 or 7075, free of iron, thermo break, saw chips, zinc corners, dirt, paper and cardboard.

Old sheet of two or more alloys (Taint/Tabor) must be clean and free of foil, venetian blinds, castings, hair wire, screen wire and food or beverage containers, with oil and grease up to 1%. New, clean, unpainted low-copper scrap of two or more alloys (Taboo) and new scrap of one specified alloy (Tooth) are separate grades.

Sources: Aluminum Association, alloy standards; ReMA ISRI Specifications, July 2026 (Nonferrous NF-2025).

Cast aluminum and wheels

ReMA's mixed aluminum castings grade (Tense) is clean castings, auto and airplane castings included but no ingots, free of iron, brass, dirt and other non-metallic items, with oil and grease up to 2%. Pull steel bolts, bushings and brass fittings out of housings before the photo.

Wheels have their own grade. ReMA's aluminum auto and truck wheels (Troma) must be free of all inserts, steel, wheel weights, valve stems, tires, grease and oil, so take off the tire and weights and pull the stems and any steel inserts.

Wheel weights are graded separately, lead ones on lead, zinc and other metals; steel weights are steel, which we do not buy.

Sources: ReMA ISRI Specifications, July 2026 (Nonferrous NF-2025).

Turnings, radiators and aluminum wire

Mixed aluminum borings and turnings (Telic) take deductions for fines over 3% through a 20 mesh screen and for dirt, free iron, oil and moisture, so drain them, dry them and keep steel chips out.

Radiators come two ways. Aluminum-copper radiators (Talk) must be free of brass tubing and iron, while clean aluminum radiators and condensers (Tally) allow iron, plastic and foam up to 1% of the weight.

New, clean EC wire and cable in 1350 or 1050 alloy (Talon) must be free of insulation, iron, tape and ACSR, the steel-reinforced line. Insulated aluminum wire (Twang) is graded on its expected recovery, the same way as the insulated copper wire we buy.

Sources: ReMA ISRI Specifications, July 2026 (Nonferrous NF-2025).

What sets an aluminum scrap price

We do not post an aluminum scrap price. One clean alloy, sorted, is a different lot from mixed alloys with paint, screws and plastic left on.

So the quote turns on the grade and alloy, how much steel, plastic, rubber and dirt is still attached, the form (solids, sheet or chips), and the weight. One alloy per pile, frames stripped of glass and rubber, and bare wheels make a lot easy to grade from photos.

Scrap is a big stream: USGS puts aluminum recovered from purchased scrap in the United States at about 3.6 million tons in 2025, about 56% of it from new manufacturing scrap and 44% from old scrap.

Sources: USGS Mineral Commodity Summaries 2026, Aluminum.

Selling aluminum, and California's rules

Photograph each pile with one close-up, add a rough weight, and send it on the quote form, to help@socalscrapmetalbuyer.com or by phone. We pick up free across Southern California, including Ventura, San Bernardino and Imperial counties as well as Los Angeles, Orange, Riverside and San Diego.

Aluminum is on the nonferrous list in Business and Professions Code 21608.5, so the sale comes with an ID copy showing your photo and address, photos of you and the aluminum, and your thumbprint, and payment is by cash or check, with the check mailed to your ID address or the cash or check collected on or after the third business day. The definition leaves out beverage containers that carry a redemption payment; California's CRV program has its own rules for those.

A business that sells under its own name, with its address, phone and business license or tax ID number and a copy of the delivering driver's license on file with the buyer, falls outside the section. The California law guide walks through both.

Sources: AB 1508, Chapter 531, Statutes of 2012 (Bus. & Prof. Code 21608.5); California Attorney General, Secondhand Dealer and Pawnbroker Laws (2012); CalRecycle, beverage container recycling for consumers.

A box truck liftgate with two boxes of sorted scrap metal outside an industrial building, palms behind

Common questions

What sets a cast aluminum scrap price?

How clean the castings are and what is still bolted to them. With steel bolts, bushings, brass fittings, oil and dirt removed, castings are quoted as clean castings; with them on, as what they are. A photo of the bolt holes and fittings tells most of the story.

How is an aluminum wheels scrap price set?

By how bare and clean the wheels are and how many you have. Take off the tires and weights, pull the valve stems and any steel inserts, and keep wheels apart from other aluminum.

Do you buy aircraft aluminum offcuts?

Yes: 2024, 7075 and every other alloy. Keep each alloy in its own bin, labeled if you know it, and include the labels in your photos.

Have metal to sell?

Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.

Call nowGet a quote