Call (562) 685-9090

Home › Metals we buy › Cobalt alloys

Cobalt scrap: Stellite, 188, L-605 and MP35N alloys

We buy cobalt scrap in its alloy forms: Stellite wear parts and saw tips, Haynes 188 and L-605 from gas turbine work, and MP35N from fasteners and medical parts. Send photos and a rough weight through the quote form, and the free pickup reaches anywhere in Southern California.

Worn cobalt alloy valve seat rings and hard-faced wear parts on a metal tray

Where cobalt goes, and where its scrap starts

In the US, cobalt is mainly an alloying metal. USGS estimates that 51 percent of the cobalt used here in 2025 went into superalloys, mainly for aircraft gas turbine engines, and 9 percent into cemented carbides for cutting and wear parts. Purchased scrap supplied 25 percent of US cobalt consumption that year, and cobalt is on the federal Final 2025 List of Critical Minerals.

An ITIA newsletter (2017) says cobalt-based superalloys are less widespread than nickel-based ones and serve static, non-rotating parts, such as those in the combustor. Locally, California EDD counted 12,700 jobs in aerospace product and parts manufacturing in San Diego County in September 2026.

Sources: USGS Mineral Commodity Summaries 2026, cobalt; Federal Register, Final 2025 List of Critical Minerals (2025-11-07); ITIA Tungsten Newsletter, March 2017; California EDD, San Diego County current employment statistics.

Stellite scrap and the other cobalt alloys

Stellite, for wear

Stellite is a family of cobalt alloys carrying tungsten, chromium, molybdenum and some carbon, used where parts face wear, corrosion and abrasion. Two research papers (2017 and 2024) put Stellite 6 at about 28 to 29 percent chromium, 4 percent tungsten and 1 percent carbon, cobalt the balance. Stellite 6 is coated onto valves for high-temperature, high-pressure service, and a 1995 study found lumber mills running saws tipped with it.

Haynes 188 and L-605, for engines

Haynes lists 188 (UNS R30188) at a nominal 39 percent cobalt, 22 nickel, 22 chromium and 14 tungsten, widely used for gas turbine combustion cans, transition ducts and afterburner parts. Haynes 25 shares UNS R30605 with L-605 and runs 51 cobalt, 10 nickel, 20 chromium and 15 tungsten; it shows up as turbine rings, blades and combustion chamber parts and as bearing balls and races.

MP35N, for fasteners and medical parts

MP35N (AMS 5844) is 33 to 37 percent nickel, 19 to 21 chromium and 9 to 10.5 molybdenum, cobalt the balance. Its datasheet lists aerospace fasteners, tie rods, medical devices and dental equipment among its uses.

Sources: Stellite alloys and Stellite 6 composition, Scanning (2017); Stellite 6 powder analysis, open-access paper (2024); Lumber mill saw study, Occupational and Environmental Medicine (1995); Haynes International, Haynes 188 datasheet; Haynes International, Haynes 25 datasheet; Special Metals, Udimet alloy L-605 bulletin; UPMET (Carpenter Technology), MP35N datasheet.

Steel and carbide that pass for cobalt scrap

Cobalt drill bits are steel. They are high-speed steel with cobalt added: a 2015 paper tested M42 at 8.0 percent cobalt with iron the balance, and a 2022 paper measured M35 at 5.00 percent cobalt. We don't buy steel, so cobalt drills and other high-speed steel tools stay out of a cobalt lot.

A hard face on steel is mostly steel. Stellite can be a welded layer: in the 2017 study, Stellite 6 was welded onto mild steel by plasma transferred arc. Photograph faced valves and shafts on their own and ask before counting them in.

Carbide counts as tungsten. Cemented carbide is tungsten carbide sintered with a cobalt binder, so inserts and other carbide tooling belong on the tungsten scrap page.

Sources: AISI M42 composition, Scientific Reports (2015); AISI M35 composition, Materials (2022); University of Pennsylvania, IPD501 speeds and feeds lecture; Stellite 6 hardfacing study, Scanning (2017).

Telling cobalt alloys apart

Not with a magnet. Cobalt metal is ferromagnetic, USGS says, but alloying changes the answer: a 2016 measurement of implant alloys found its cobalt-chromium-molybdenum samples paramagnetic, while a Japanese dental study reported ferromagnetism in cobalt-chromium dental alloys. So a magnet cannot settle what a cobalt alloy part is; its history can.

USGS describes how skilled sorters work: a first pass by shape, object recognition, color and weight, then a magnet, the spark pattern off a grinding wheel, or chemical or physical analysis. For a seller, the strongest evidence is the part's history. A seat ring from a valve rebuild, a combustor liner from an engine overhaul and a box of MP35N fasteners with a cert each go in their own labeled box; see keeping alloy scrap separate and how to identify scrap metal.

Sources: USGS Circular 1196 A-M, cobalt chapter and sorting methods (2004); ISMRM 2016, abstract 4309: magnetization of implant alloys; Dental alloy MRI artifact study (OSTI ETDEWEB 300687).

Cobalt scrap price: alloy, form and a moving market

We don't post a cobalt price; your lot gets its own quote from photos, alloy, form, cleanliness and weight. Cobalt content alone swings widely: Haynes lists 188 at 39 percent and 25 at 51 percent. What helps a quote:

  • An alloy you can show, from a tag, cert, part number or the job it came from.
  • Solids such as seat rings, liners and bar ends, which are easier to identify than grindings or mixed turnings.
  • No steel backing, bolts or weld attached, since those are not cobalt alloy.

The market moves too. USGS reports that in February 2025 Congo (Kinshasa), which supplied an estimated 73 percent of world mined cobalt that year, "temporarily banned cobalt exports to address market oversupply and low prices".

Sources: USGS Mineral Commodity Summaries 2026, cobalt; Haynes International, Haynes 188 datasheet; Haynes International, Haynes 25 datasheet.

Selling cobalt alloys to us

Photograph each alloy on its own with any tag or cert, add a rough weight and the location, and send it through the quote form or to help@socalscrapmetalbuyer.com, or call (562) 685-9090. Pickup is free anywhere in Southern California, including San Diego, Riverside and San Bernardino counties.

California's junk-dealer rules cover all ferrous and nonferrous scrap metals and alloys. The buyer keeps a written record of each purchase, with the seller's name and ID, a description of the material and a statement of ownership, and reports it to the police or sheriff daily or by the next business day. The extra steps for nonferrous material in Bus. & Prof. Code 21608.5 are written for copper, copper alloys, stainless steel and aluminum. California scrap metal law for sellers has the details.

Sources: California Attorney General, Information Bulletin 2025-DLE-12; AB 1508, Chapter 531, Statutes of 2012 (Bus. & Prof. Code 21608.5).

Common questions

Do you buy Stellite scrap from valve and pump rebuilds?

Yes: solid Stellite pieces such as seat rings, sleeves and worn wear parts. If the Stellite is a welded face on a steel part, photograph it separately and ask, because we do not buy steel.

Do cobalt drill bits go in a cobalt lot?

No. A cobalt drill is high-speed steel with some cobalt in it, and we don't buy iron or steel.

How do you quote cobalt scrap without a price list?

From the lot: which alloy it is and how well that is documented, its form, how clean it is and its weight. Photos and a rough weight through the quote form are enough to start.

Do used carbide inserts count as cobalt scrap?

They hold cobalt as the binder, but they are tungsten carbide, so they belong with the tungsten scrap. Keep inserts in their own container.

Have metal to sell?

Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.

Call nowGet a quote