Call (562) 685-9090

Home › Metals we buy › Tantalum and niobium

Tantalum scrap and niobium: sheet, rod, wire and offcuts

We buy tantalum scrap and niobium as metal: sheet, rod, wire, tube and offcuts from chemical plants, medical device makers and machine shops. Pickup is free anywhere in Southern California; send photos through the quote form.

Tantalum and niobium sheet trimmings, short rods and fine wire on a lab bench

Two metals that come out of the ground together

USGS puts it plainly: "Niobium and tantalum are transition metals that are almost always found together in nature because they have very similar physical and chemical properties." The Royal Society of Chemistry says niobium was even named after Niobe, daughter of King Tantalus, for its chemical similarity to tantalum.

In a scrap pile they part ways on weight. RSC lists tantalum, element 73, at 16.4 g/cm3 with a melting point of 3017 C, and niobium, element 41, at 8.57 g/cm3 and 2477 C, so a tantalum offcut weighs nearly twice what the same niobium offcut does. USGS describes tantalum as dark blue-gray and niobium as lustrous gray.

Sources: USGS Professional Paper 1802-M: niobium and tantalum; Royal Society of Chemistry: tantalum; Royal Society of Chemistry: niobium.

Where tantalum and niobium scrap come from

Tantalum turns up in chemical plants and medical work. USGS says its corrosion resistance makes it useful in the chemical industry, generally as a lining to pipes, tanks and vessels, and that tantalum in particular goes into a variety of medical devices and surgical implants. Orange County has a large medical device industry: the Orange County Business Council's 2021-22 Community Indicators report lists its medical device cluster at 17,231 jobs, ranked first nationally.

USGS's 2026 summary says tantalum was recycled mostly from new scrap generated in making tantalum-containing electronic components and from tantalum-containing cemented carbide and superalloy scrap, and that recycling may account for as much as 30% of consumption by domestic primary processors.

Niobium mostly disappears into other metals. USGS says it was consumed mostly as ferroniobium by the steel industry and as niobium alloys and metal by the aerospace industry, and that scrap recovery specifically for niobium content was negligible. The niobium we buy is the metal and its alloys. Niobium inside steel is steel scrap, which we do not buy, and the niobium in Inconel 718, about 5 percent according to USGS, goes with the Inconel.

Sources: USGS Professional Paper 1802-M: niobium and tantalum; Orange County Business Council: Community Indicators 2021-22; USGS Mineral Commodity Summaries 2026: tantalum; USGS Mineral Commodity Summaries 2026: niobium; USGS Circular 1196-A-M: metal recycling in the United States.

What a tantalum or niobium lot looks like

  • Sheet and foil: trimmings, punchings and offcuts.
  • Rod, bar and tube: drops, ends and rejected pieces.
  • Wire: spools, ends and tangles, kept dry.
  • Lining and fabricated parts: pieces cut from lined pipes, tanks and vessels, and other parts that came out of service.
  • Turnings: in their own covered container.

Keep tantalum and niobium in separate containers, and both away from carbide and superalloy scrap. If a part came out of chemical service, say in the notes what it held.

Zirconium, hafnium and rhenium

Three more metals turn up around the same industries. We quote them like everything else, from photos and a description, and promise nothing about value before we see them.

  • Zirconium: USGS says it is used in nuclear reactors, aerospace heat shields and engine components, and that hafnium-free zirconium goes into nuclear reactor structures and fuel rod cladding.
  • Hafnium: USGS says the leading use of hafnium metal was in superalloys, and that hafnium metal recycling was minimal.
  • Rhenium: USGS estimates about 80 percent of rhenium end uses were superalloys for high-temperature turbine engine parts, and says the United States recovers it from nickel-base superalloy scrap, spent oil-refining catalysts and foundry revert. USGS calls engine revert, made from scrapped parts, a high-quality, lower-cost superalloy meltstock. A rhenium-bearing turbine part is superalloy scrap, so keep it with the nickel superalloys.

Sources: USGS: final 2025 list of critical minerals; USGS Professional Paper 1802-V: zirconium and hafnium; USGS Mineral Commodity Summaries 2026: zirconium and hafnium; USGS Mineral Commodity Summaries 2026: rhenium.

Sorting them, and what sets a tantalum scrap price

Weight does most of the sorting. A magnet does not help: a 2023 paper calls tantalum a nonferromagnetic metal, so a magnet will not pick it up, but HyperPhysics names only iron, nickel, cobalt and some rare earths as ferromagnetic, so most other shop metals pass the magnet too.

Carbide that contains tantalum stays with the carbide. USGS says tantalum carbide is hard enough to be ideal for cutting tools, and that chemical processing of carbide scrap also collects tantalum, in an oxide sludge; a carbide insert is quoted as tungsten carbide.

After that, a tantalum scrap price depends on what the piece is: pure metal or alloy, solid or turnings, clean or carrying residue from service, and how much there is. Markets move, too: USGS reports that the value of US tantalum waste and scrap imports rose 40% in 2025 compared with 2024. We quote each lot from its photos rather than post a number.

Sources: Biomimetics (2023): tantalum in medicine (PMC9944482); HyperPhysics (Georgia State University): ferromagnetism; USGS Professional Paper 1802-M: niobium and tantalum; USGS Open-File Report 01-349; USGS Mineral Commodity Summaries 2026: tantalum.

Selling tantalum and niobium to us

Send photos of the lot and a few close-ups, a rough weight and the city through the quote form or to help@socalscrapmetalbuyer.com, or call (562) 685-9090. The pickup is free, and it covers all of Southern California, including Ventura, Los Angeles, Orange, San Diego, Riverside, San Bernardino and Imperial counties.

California asks every junk dealer and recycler to keep a written record of each purchase, report it to the police or sheriff daily or by the next business day, and keep the records for at least two years. From the seller, that means a valid ID such as a driver's license and a statement that you own the metal or of where it came from. Tantalum and niobium are not on the list in Business and Professions Code 21608.5, whose stricter rules are written for copper, copper alloys, stainless steel and aluminum; the California scrap metal law guide has the detail.

Sources: California Attorney General Information Bulletin 2025-DLE-12; California Attorney General: secondhand dealer laws (2012 compilation); AB 1508, Chapter 531, Statutes of 2012 (Bus. & Prof. Code 21608.5).

Common questions

What is the tantalum scrap price per pound?

We do not publish one. Pure sheet, alloy, turnings and parts from chemical service are valued differently and markets move, so photos and a rough weight get a quote for your lot.

How do I tell tantalum from niobium?

Pick them up. Tantalum is far heavier than niobium for the same size, and a mill certificate settles any doubt.

Do you buy niobium scrap that is inside steel?

No. Niobium in steel is steel scrap, and we do not buy iron or steel. We buy niobium metal and niobium alloys.

Will you quote zirconium or hafnium?

Yes. Send photos and what you know about the material. We quote from what we see and make no promise about value before that.

Have metal to sell?

Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.

Call nowGet a quote