Home › Metals we buy › Brass and bronze
Brass and bronze scrap, quoted alloy by alloy
There is no single brass scrap price, because yellow brass, red brass and bronze are different alloys and each is its own grade. We buy all of them, solids and turnings, quote each from your photos and a rough weight, and the pickup is free anywhere in Southern California.

Brass or bronze: what the names mean
The Copper Development Association puts it in two lines: "Brasses are mainly copper and zinc. Bronzes are mainly copper along with alloying elements such as tin, aluminum, silicon or beryllium."
Names and chemistry do not always line up. CDA notes that statuary bronze is technically a brass, with under 10 percent tin plus some zinc and lead, so a piece is graded by what it is, not by what it was called.
For the visual tells, and why the difference matters when you sell, see brass vs bronze.
Yellow brass scrap
Solids are whole pieces, as opposed to turnings. ReMA's yellow brass grade, Honey, is mixed yellow brass solids: castings, rolled brass, rod brass, tubing and plated brass. In CDA's numbering the wrought brasses run from UNS C20000 to C49999, covering the yellow brasses (copper-zinc), the leaded brasses (copper-zinc-lead) and the tin brasses (copper-zinc-tin).
Honey must be free of manganese bronze, aluminum bronze, unsweated radiators, iron and excessively dirty and corroded material. So pull steel stems and handles, keep bronze out, and give faucets their own box: ReMA grades cocks and faucets separately (Grape), as mixed red and yellow brass with at least 35% semi-red.
Brass pipe is a grade too (Melon), as long as it carries no plating, solder or cast brass connections. And if your shop runs C36000, the leaded yellow brass CDA calls the benchmark for machinability, keep its chips apart from every other alloy.
Sources: ReMA ISRI Specifications, July 2026 (Nonferrous NF-2025); CDA datasheet, Wrought Brasses (May 2026); Copper Development Association, Copper Facts.
Red brass and bronze scrap
ReMA's red brass grade (Ebony), which it calls composition or red brass, is red brass scrap, valves, machinery bearings and other machinery parts, including castings of copper, tin, zinc and lead. Pieces should be no more than 12 inches over any one part or 100 pounds, heavier ones by agreement, and semi-red castings at 78% to 81% copper are kept out.
Bronze is a family, not one metal. CDA lists bearings, gears, piston rings, valves and fittings among tin bronze uses, numbers the cast tin bronzes UNS C90200 to C91700 and the leaded tin bronzes C92200 to C94500, and puts aluminum bronzes at C60800 to C64699 and silicon bronzes at C64700 to C66199. ReMA's manganese bronze solids (Parch) hold at least 55% copper and no more than 1% lead.
Under ReMA's terms a shipment that does not match its description can be rejected or downgraded, so keep each bronze you can name in its own box.
Sources: ReMA ISRI Specifications, July 2026 (Nonferrous NF-2025); Copper Development Association, Copper-Tin Alloys; CDA datasheet, Wrought Bronzes (May 2026).
Brass turnings and shop solids
Turnings, the chips that come off a lathe or screw machine, have their own grades. ReMA's yellow brass rod turnings (Night) should carry no more than 3% free iron, oil or other moisture, no grindings or babbitt, and at most 0.30% tin and 0.15% alloyed iron, and yellow brass turnings (Nomad) sell subject to sample or analysis, to avoid dispute.
Drain the coolant, pull steel chips out with a magnet (OSHA's scrap recycling guide notes that ferrous metals are magnetic), and never mix brass chips with bronze or copper chips. For high-grade solids, ReMA recommends selling low-lead bronze and brass (Eland) by analysis and high-lead bronze (Elias) on sample or analysis.
Beryllium copper chips are another matter entirely; see lead, zinc and other metals. Shops that also machine nickel alloys or titanium can add those drums to the quote; see nickel alloy scrap.
Sources: ReMA ISRI Specifications, July 2026 (Nonferrous NF-2025); OSHA 3348, Metal Scrap Recycling.
What sets a brass scrap price
We do not print a brass scrap price. A bucket marked brass can hold yellow rod, red valves, plated faucets and a few bronze bushings, and each of those is a different grade.
What moves the number is the alloy (yellow, red or a named bronze), whether the steel stems, handles, plastic and dirt are off, the form (solids or turnings), and the weight. ReMA's own advice for any deal is to use its code names or describe the material clearly, and to state any allowed variation.
Send a photo of each box and we will tell you which grades we see.
Sources: ReMA ISRI Specifications, July 2026 (Nonferrous NF-2025).

Selling brass and bronze, and what California asks
Box the metal by kind (yellow, red, bronze, turnings), photograph each box with one close-up of a typical piece, and send the photos with a rough weight through the quote form, by email or by phone at (562) 685-9090. We pick up free anywhere in Southern California, in counties such as Orange, Los Angeles, San Diego and Ventura.
Brass and bronze are copper alloys, which puts them under the nonferrous rules of Business and Professions Code 21608.5: a copy of your photo ID with your address, photos of you and of the metal, a thumbprint, and payment by cash or check, with a check mailed to the address on your ID or the money collected on or after the third business day.
A 2025 law, AB 476, expanded the buyer's record. As the Senate Public Safety Committee described it, the record adds the time, the amount paid, the employee's name, the weight and any engraved or etched marks or serial numbers, and the seller signs a statement giving legal name, date of birth and place of residence. The California law guide has the rest.
Sources: AB 1508, Chapter 531, Statutes of 2012 (Bus. & Prof. Code 21608.5); California Attorney General, Secondhand Dealer and Pawnbroker Laws (2012); Assembly Business and Professions Committee, 2025 Legislative Summary; Senate Public Safety Committee, analysis of AB 476 (2025).
Common questions
What is the yellow brass scrap price based on?
The weight, and how clean and well sorted the brass is. Yellow brass with the steel stems, plastic and bronze pulled out is quoted as clean yellow brass; with them mixed in, it is quoted as the mix it is.
What sets a bronze scrap price?
Which bronze it is. Tin, aluminum, silicon and manganese bronzes are different alloys, so a box of one named bronze is quoted on that alloy and a mixed box as a mix. Stamped alloy numbers, part numbers or mill certs help.
Do you buy brass and bronze turnings?
Yes. Keep them dry, keep steel chips and other alloys out, and photograph a handful up close next to the drum or bucket they sit in.
Keep reading

Brass vs bronze
How to tell them apart, and why it matters when you sell
Read it
Copper
Bare bright, #1 and #2 copper, pipe and turnings
See what we take
Lead, zinc, tin and more
The other nonferrous metals, by the pound
See what we take
Keeping alloy scrap separate
For machine shops: bins, turnings and solids
Read it
Scrap metal prices
What sets the price per pound, metal by metal
Read it
California scrap metal law for sellers
ID, photos, thumbprints and the third-business-day rule
Read itHave metal to sell?
Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.