Call (562) 685-9090

Home › Metals we buy › Lead, zinc, tin and more

Lead, zinc, tin, pure nickel and the other everyday metals

There is no fixed lead scrap price on this page, because clean soft lead, wheel weights and lead-covered cable are different grades, and we quote yours from photos and a rough weight. The same goes for zinc, tin, pure nickel, cupronickel, magnesium and beryllium copper, and the pickup is free anywhere in Southern California.

Lead flashing, wheel weights, zinc die-cast parts and old solder bars on a pallet

Lead scrap: soft lead, wheel weights and cable

Clean soft lead, ReMA's Racks, has to be free of drosses, battery plates, lead-covered cable and hard lead. Scrape tar, nails and wood off old sheet, pipe and flashing before the photo.

Wheel weights are graded on their own: ReMA's Ropes is lead wheel weights with or without iron clips. Steel wheel weights are steel, and we do not buy steel, so sort them out with a magnet first. Lead-covered copper cable is its own grade too (Relay), and it must be free of armored covered cable.

Recycled lead covers most of what the US uses. USGS estimates about 1 million tons of secondary lead was produced in 2025, equal to 70% of apparent domestic consumption, and the last primary lead refinery in the country closed in 2013.

Sources: ReMA ISRI Specifications, July 2026 (Nonferrous NF-2025); USGS Mineral Commodity Summaries 2026, Lead; OSHA 3348, Metal Scrap Recycling.

Zinc scrap: die cast, sheet and plate

Zinc die castings turn up as hardware, handles, housings and fittings. ReMA's old zinc die cast (Saves) may carry iron and other attachments, but unmeltables, dirt, attachments and volatile substances such as rubber, cork, plastic and grease are deductible, and material over 30% iron is not good delivery.

New, unused die castings (Scabs) must be clean, unplated, unpainted and free from corrosion. Clean dry zinc sheet, jar lids, clean unalloyed castings and anti-corrosion plates make up Score, and new pure zinc sheet or stampings free from corrosion are Screen.

Sources: ReMA ISRI Specifications, July 2026 (Nonferrous NF-2025).

Tin, pewter and babbitt

Tin is graded by how much tin is in it. ReMA's block tin (Ranch) must assay at least 98% tin, pewter tableware and soda-fountain boxes (Ranks) should hold at least 84%, and high tin base babbitt (Raves) at least 78%, with no brassy or zincy metals.

USGS estimates about 17,000 tons of tin was recycled from old and new scrap in the United States in 2025.

A can that a magnet grabs is steel, whatever it is called, and we do not buy steel.

Sources: ReMA ISRI Specifications, July 2026 (Nonferrous NF-2025); USGS Mineral Commodity Summaries 2026, Tin; OSHA 3348, Metal Scrap Recycling.

Pure nickel, cupronickel and magnesium

ReMA has two pure nickel grades: new nickel scrap (Aroma) at a minimum 99% nickel with no more than 0.25% cobalt and 0.50% copper, and old nickel scrap (Burly) at a minimum 98% nickel and no more than 0.50% copper. Special Metals describes Nickel 200 as commercially pure (99.6%) wrought nickel.

A magnet will not sort nickel from steel. HyperPhysics lists iron, nickel and cobalt as ferromagnetic, so keep labeled nickel away from the steel pile.

Cupronickel belongs to copper-nickel, one of the best-known copper alloy families by CDA's account; ReMA grades new, segregated 70/30, 80/20 or 90/10 tube, pipe, sheet and plate (Dandy) apart from solids with up to 2% sediment (Daunt). Magnesium has grades too: clean clips (Wafer), and castings, engine blocks, transmission casings, wheels, extrusions and sheet (Walnut).

Nickel alloys such as Inconel, Monel and Hastelloy are the metals we put first, and they have their own pages: Inconel scrap and nickel alloy scrap.

Sources: ReMA ISRI Specifications, July 2026 (Nonferrous NF-2025); Special Metals, Nickel 200 technical bulletin; HyperPhysics (Georgia State University), Ferromagnetism; Copper Development Association, Copper Is.

Beryllium copper scrap

Beryllium copper is a copper alloy: the Copper Development Association lists C17200 as a wrought copper beryllium in its high copper alloys group. OSHA says beryllium-copper alloys go into switches in automobiles, computers, radar, satellite and telecommunications equipment for their conductivity, hardness and corrosion resistance.

Keep it apart from everything else. In OSHA's words, "Beryllium scrap should be kept segregated from other metals because of its higher value as a recyclable material when compared to mixed metal alloys."

OSHA adds two points shops should know: machining, grinding, cutting or sanding an item that contains beryllium is processing, outside the standard's exemption for articles, and material for recycling with at least 0.1 percent beryllium must be labeled under the Hazard Communication standard.

Keep the paperwork with it. EPA Method 6200 lists beryllium among the light elements field portable XRF cannot detect, so labels, mill certs and part numbers are worth keeping with the scrap.

Sources: CDA alloy finder, C17200; OSHA, Small Entity Compliance Guide for the Beryllium Standard; US EPA Method 6200 (field portable XRF).

Selling these metals, and the rules that apply

Photograph each metal on its own with one close-up, and send a rough weight and where it sits through the quote form, by email or by phone at (562) 685-9090. Pickup is free anywhere in Southern California, in places such as a roofing job in Orange County, a marina in San Diego County or a plant floor in Riverside County.

California's general record rules cover every purchase of junk, which the law defines as all ferrous and nonferrous scrap metals and alloys: the buyer records your name and ID, a description of the metal and a statement that you own it or naming who you got it from, reports the record to police daily or by the next business day, and keeps it for at least two years.

The stricter section, Business and Professions Code 21608.5, defines its nonferrous material as "copper, copper alloys, stainless steel, or aluminum." Lead, zinc, tin and nickel are not in that text; beryllium copper and cupronickel are copper alloys by CDA's classification. The California law guide covers both sets of rules.

Sources: California Attorney General, Information Bulletin 2025-DLE-12; California Attorney General, Secondhand Dealer and Pawnbroker Laws (2012); AB 1508, Chapter 531, Statutes of 2012 (Bus. & Prof. Code 21608.5); Copper Development Association, Copper Is; CDA alloy finder, C17200.

Common questions

What is the zinc scrap price based on?

Which zinc it is and how clean it is. New die castings, old die castings with attachments, and clean sheet are different grades, so photograph a few pieces up close, screws and inserts included, and we quote from that.

Is there any scrap you won't buy?

Yes: we do not buy iron, steel or catalytic converters. Every other metal we do, from lead flashing and zinc die cast to Inconel turnings.

Can beryllium copper go in with my other copper?

Keep it out. Store beryllium copper in its own labeled box with any paperwork that names the alloy, so it is quoted as beryllium copper instead of disappearing into a mixed lot.

Can lead, zinc and copper go in one pickup?

Yes. One free pickup can take every metal you have except iron and steel; keep each metal in its own box or bag so each gets its own quote.

Have metal to sell?

Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.

Call nowGet a quote