Call (562) 685-9090

Home › Metals we buy › Molybdenum

Molybdenum scrap: moly sheet, rod, TZM and worn furnace parts

We buy molybdenum scrap as the metal itself, from sheet and rod offcuts to TZM tooling and worn furnace parts, and the pickup is free anywhere in Southern California. A few photos through the quote form get your lot quoted.

Molybdenum sheet offcuts and strips with a faint heat sheen on a pallet

Molybdenum metal, not the moly inside steel

USGS describes molybdenum as a refractory metallic element used principally as an alloying agent in cast iron, steel and superalloys, and in chemical uses such as catalysts, lubricants and pigments. The International Molybdenum Association (IMOA) says more than 80% of molybdenum is used in metal alloying. Moly inside steel is steel scrap, and we do not buy steel.

What we buy is the metal. IMOA's brochure says pure molybdenum, at a minimum of 99.95-99.97% Mo depending on the producer, makes up the majority of molybdenum metal products, such as furnace and glass melting components, power semiconductor heat sinks and sputtering targets. The Royal Society of Chemistry gives molybdenum a melting point of 2622 C and a density of 10.2 g/cm3.

Moly already comes back. USGS's 2026 summary says molybdenum recycled as part of steel and other scrap may be as much as 30% of apparent US supply, and that "Molybdenum is recycled as a component of catalysts, ferrous scrap, and superalloy scrap."

Sources: USGS Mineral Commodity Summaries 2026: molybdenum; IMOA: molybdenum in iron, steel and other alloys; IMOA: Applications of Molybdenum Metal and its Alloys (2013); Royal Society of Chemistry: molybdenum.

Moly sheet, rod, TZM and furnace parts we take

USGS describes new molybdenum scrap as pure and alloyed molybdenum metal from chemical plants and furnaces, trimmings from fabrication, and fabricated items that cannot be used. On the metal side we buy:

  • Sheet, plate and foil: trimmings and offcuts.
  • Rod, bar and wire: ends, drops and rejected pieces.
  • TZM: worn forging dies, blocks and round bar, labeled.
  • Furnace and HIP internals: heating elements, radiation shields and other moly parts from a rebuild. IMOA says hot isostatic pressing relies heavily on molybdenum internal components, and lists heating elements and radiation shields among the uses of molybdenum alloys.
  • Turnings and powder: sealed, in their own containers.

Sources: USGS Circular 1196-A-M: metal recycling in the United States; IMOA: Applications of Molybdenum Metal and its Alloys (2013); IMOA: molybdenum metal and alloys.

TZM is almost all molybdenum, so label it

An IMOA MolyReview article gives TZM approximately 0.5 wt% titanium, 0.08 wt% zirconium and 0.03 wt% carbon, and says that despite its tiny alloy content it has extraordinary strength at isothermal forging temperature. IMOA's brochure says the isothermal forging of superalloy gas turbine engine discs uses TZM tooling at 1100-1200 C, and that X-ray tube rotors use machined molybdenum or Mo-TZM round bar.

With that little alloy in it, a scale will not tell TZM from pure moly. The part's job and its paperwork will: a forging die or a rotor bar is a TZM candidate, and a certificate settles it. Keep TZM in its own labeled box.

Sources: IMOA MolyReview 1/2017: metalworking tools; IMOA: Applications of Molybdenum Metal and its Alloys (2013).

Moly, tungsten or tantalum: weigh it

USGS lists graphite, tantalum and tungsten as potential substitutes for molybdenum in high-temperature electric furnaces, so all three metals can come out of the same kind of equipment. Weight sorts them. The Royal Society of Chemistry gives molybdenum 10.2 g/cm3, tantalum 16.4 and tungsten 19.3; NIST lists iron at 7.874.

That makes a tungsten piece nearly twice as heavy as the same piece of moly, and tantalum about 1.6 times, while moly is only about 1.3 times the weight of iron. Heavier than iron but nowhere near tungsten points to moly.

Two look-alikes are not moly scrap. Nickel alloys such as Hastelloy X carry molybdenum (its datasheet lists 9%), but they go with the nickel alloys. And ITIA says US and Japanese markets use mainly low-tungsten, high-molybdenum high-speed steels such as M1 and M7; those tools are steel, and we do not buy steel.

Sources: USGS Mineral Commodity Summaries 2026: molybdenum; Royal Society of Chemistry: molybdenum; Royal Society of Chemistry: tantalum; Royal Society of Chemistry: tungsten; NIST: densities of the elements (X-ray attenuation tables); Haynes International: HASTELLOY X datasheet; ITIA: tungsten in steel.

How a molybdenum scrap price gets set

We quote moly lot by lot. What moves the number:

  • Pure or alloy. Pure moly, TZM and moly-bearing alloys are different materials, in different containers.
  • Form. Sheet, rod and solid parts are simpler to value than turnings or powder.
  • What is attached. Bolts, brackets, insulation or other metals left on furnace parts are not molybdenum; strip what comes off easily and photograph the rest.
  • Weight and history. A rough weight and a line about where the parts were used.

Markets matter too. USGS reports that the Government of China imposed export controls on molybdenum powders in February 2025, the kind of change a printed price list cannot keep up with.

Sources: USGS Mineral Commodity Summaries 2026: molybdenum.

Selling molybdenum to us: free pickup and California's record

Photograph the lot as it sits, a few pieces close up and any labels or certificates, and send them with a rough weight through the quote form, to help@socalscrapmetalbuyer.com, or call (562) 685-9090. We pick up anywhere in Southern California, such as Los Angeles, Orange, Riverside, San Bernardino, San Diego, Ventura or Imperial county, and the pickup is free.

At the sale, California law has the buyer record the seller's name and identification, such as a driver's license or state ID card, and describe the material. A 2025 law, AB 476, expanded that record; as the Senate Public Safety Committee described it, the bill adds the time, amount paid, employee name, weight and any engraved or etched marks, and requires a signed seller statement with the seller's legal name, date of birth and place of residence. Molybdenum is not on the list in Business and Professions Code 21608.5, whose stricter rules cover copper, copper alloys, stainless steel and aluminum. See the California scrap metal law guide.

Sources: California Attorney General Information Bulletin 2025-DLE-12; Senate Public Safety Committee analysis of AB 476 (2025); Assembly Business and Professions Committee: 2025 legislative summary; AB 1508, Chapter 531, Statutes of 2012 (Bus. & Prof. Code 21608.5).

Common questions

What is the molybdenum scrap price right now?

We do not post one. Pure sheet, TZM tooling, furnace parts and oily turnings are valued differently and the market moves, so send photos and a rough weight for a quote.

Is TZM bought as molybdenum?

Yes. TZM is a molybdenum alloy and we buy it. Keep it boxed and labeled on its own so it does not get mixed into pure moly.

Do you buy steel that contains molybdenum?

No. Moly-bearing steels, high-speed steel drills and taps included, are steel, and we do not buy iron or steel.

Can moly and tungsten offcuts share one box?

Better not. They are different metals with very different weights, and a box of one metal is simpler to quote. Two boxes, two labels.

Do you collect moly from a furnace teardown?

Yes, anywhere in Southern California, and the pickup is free. Send photos of the parts, a rough amount and the location.

Have metal to sell?

Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.

Call nowGet a quote