Home › Pickup in Southern California
Free scrap metal pickup, anywhere in Southern California
Scrap metal pickup is how we buy, and the pickup is free anywhere in Southern California. Send photos and a rough weight through the quote form, take the quote, and we come to your shop, plant, jobsite or garage to load everything but the iron and steel.

How a free scrap metal pickup works
- Show us the metal. Send photos, the metals and a rough weight through the quote form, email them to help@socalscrapmetalbuyer.com, or call (562) 685-9090. Say where it sits: the city, the site and how it is stored.
- Get a quote for that lot. We price it from the photos: the alloy, the form (solids, turnings, sheet, pipe, wire), how clean it is and the weight. There is no price list, and here is why.
- We come to you. Shop, plant, jobsite, yard or garage, anywhere in Southern California, and the pickup is free.
- Have your ID with you. What California asks a seller for is further down this page.
What goes on the truck: Inconel and other nickel superalloys, Hastelloy, Monel, titanium, cobalt alloys such as Stellite, tungsten, molybdenum, tantalum and niobium first, then copper, insulated wire, brass, bronze, aluminum, lead, zinc and tin. No iron, no steel, and no catalytic converters.
Southern California, county by county
Send photos and a rough weight, get a quote, and we come out to load it, free: a shop, a yard, a jobsite or a garage.
- Los Angeles
- Orange
- Riverside
- San Bernardino
- San Diego
- Ventura
- Imperial

Scrap metal in Los Angeles County: aerospace and the port
Los Angeles County is the most populous county in the country: 9,694,934 people on July 1, 2025, by the Census Bureau's estimate. California's Employment Development Department counted 297,400 manufacturing jobs there in September 2026, and 53,000 of them were in aerospace product and parts manufacturing.
Aerospace is where titanium and nickel superalloy scrap starts. USGS says most US titanium metal went into aerospace in 2025, and its flow study of titanium in 2004 put the sector's buy-to-fly ratio, the material bought for each unit of finished part, at about 5:1. For superalloys such as Inconel 718, USGS found turnings make up the biggest share of new scrap by volume.
Scrap also leaves through the county's port: recyclable metal was the Port of Los Angeles's fourth-largest export in 2025, at 100,156 TEUs. GO-Biz lists U.S. Space Systems Command at the Los Angeles Air Force Base among California's space assets. If your shop machines parts for that work, the bins likely hold titanium and nickel alloy turnings, solids and offcuts, and we pick those up along with copper, brass and aluminum, but not steel.
Sources: US Census Bureau, Vintage 2025 county estimates (March 2026); California EDD, Los Angeles County jobs (CES); USGS Mineral Commodity Summaries 2026: Titanium; USGS Circular 1196-Y, titanium recycling (2010); USGS Circular 1196-A-M, metal recycling flow studies (2004); Port of Los Angeles, Facts and Figures CY 2025; GO-Biz, aerospace and defense in California.
Scrap metal in Orange County: plants and medical devices
Orange County had 147,400 manufacturing jobs in September 2026, by California EDD figures, and 3,149,507 residents on July 1, 2025, the sixth-largest county population in the US by the Census Bureau's count.
Medical devices stand out. An Orange County Business Council report for 2021-22, using US Cluster Mapping data, counted 17,231 medical device jobs in the county and ranked the cluster first in the nation.
That work uses alloys we buy. ASTM F67 covers four grades of unalloyed titanium for surgical implants and F136 covers Ti-6Al-4V ELI for implants; MP35N, a cobalt-nickel-chromium-molybdenum alloy, has medical devices on its datasheet's list of uses; and USGS notes tantalum's use in medical devices and surgical implants. Keep each alloy in its own bin and photograph the heat or lot tags.
Sources: California EDD, Orange County jobs (CES); US Census Bureau, Vintage 2025 county estimates (March 2026); Orange County Business Council, Community Indicators 2021-22; ASTM F67, unalloyed titanium for surgical implants; ASTM F136, Ti-6Al-4V ELI for surgical implants; MP35N datasheet (UPMET); USGS Professional Paper 1802-M, niobium and tantalum (2017).
Scrap metal in San Diego County: defense, aerospace and ships
San Diego County had 3,282,248 residents on July 1, 2025, fifth among US counties (Census Bureau), and 110,100 manufacturing jobs in September 2026, 12,700 of them in aerospace product and parts manufacturing (California EDD).
The San Diego Regional EDC describes a manufacturing cluster spanning defense, aerospace, shipbuilding and repair, and medical devices, among other industries. Marine work points to nickel and copper alloys: USGS says nickel-copper alloys such as Monel, at 65 to 70 percent nickel, and copper-nickel alloys such as cupronickel, at 10 to 30 percent nickel, are used largely in marine applications because they corrode slowly in flowing seawater.
So a San Diego pickup might be Monel valve parts and cupronickel pipe from a repair job, aerospace offcuts, or a garage full of copper pipe and wire. All of it can go except iron and steel.
Sources: US Census Bureau, Vintage 2025 county estimates (March 2026); California EDD, San Diego County jobs (CES); San Diego Regional EDC, manufacturing; USGS Circular 1196-Z, nickel recycling (2009).
Scrap metal in Riverside and San Bernardino: the Inland Empire
EDD lists the two counties' metro area as Riverside-San Bernardino-Ontario. It counted 43,800 manufacturing jobs in Riverside County and 50,600 in San Bernardino County in September 2025, and the Census Bureau put Riverside County at 2,544,916 residents on July 1, 2025, tenth among US counties.
Out here a pickup might be a plant clearing out a line, a contractor's copper and wire, aluminum extrusion off a job, or a shop's drums of brass turnings. Same free pickup, same quote from photos.
Sources: California EDD, metropolitan areas; California EDD, Riverside County jobs (CES); California EDD, San Bernardino County jobs (CES); US Census Bureau, Vintage 2025 county estimates (March 2026).
Ventura County, Imperial County and everywhere between
The pickup doesn't stop at the counties above. Ventura and Imperial counties get the same free pickup, the same quote from photos and the same list of metals, and so does every city and town between the coast and the desert.
A remote site is fine. Tell us on the quote form exactly where the metal is and how a truck gets to it.
What to have ready when we come
Photos and a rough weight
One wide shot of everything, then close-ups: tags, stamps and heat numbers on solids, the cut ends of wire, the inside of a drum of turnings, and anything bolted or welded on. A rough count does for the weight: so many drums, gaylords (pallet-size cardboard boxes), pallets or pieces.
Alloys kept apart
Leave titanium, Inconel, Hastelloy and cobalt alloys in separate bins, turnings apart from solids, and brass apart from copper. The guide to keeping alloy scrap separate shows how.
Access
Tell us where a truck can park, whether there is a dock or a forklift on site, how far the metal is from the door, and any gate code or site hours to work around.
The ID and record California asks for
California's junk dealer law has the buyer keep a written record of each purchase, and the Attorney General's June 2025 bulletin lists what goes in it: your name and a method of identification such as a valid driver's license or state-issued ID card, a description of the metal with its type, quantity and any visible identification numbers, and a statement that you own it or the name of the person you got it from.
For copper, brass, bronze and aluminum, Business and Professions Code 21608.5 adds a copy of an ID showing your photo and address, a photo or video of you and of the metal, and your thumbprint. That section doesn't apply when the buyer has the selling business's name, physical address and phone number, its business license or tax ID number, and a copy of the driver's license of the person delivering the material.
A 2025 law, AB 476, expanded the record. As the Senate Public Safety Committee described it, the bill adds the time, the amount paid, the employee's name, the weight and any engraved or etched marks, plus a seller statement signed with your legal name, date of birth and residence address. The full rules are in the California scrap metal law guide.
Sources: California Attorney General, Information Bulletin 2025-DLE-12 (June 2025); California Attorney General, Secondhand Dealer and Pawnbroker Laws (2012); AB 1508, Chapter 531, Statutes of 2012 (chaptered text); Copper Development Association, Copper Is; Assembly Business and Professions Committee, 2025 Legislative Summary; Senate Public Safety Committee, analysis of AB 476 (2025).
Common questions
Is the scrap metal pickup really free?
Yes. The pickup is free anywhere in Southern California. Send photos and a rough weight, we quote the lot, and if you take the quote we come and load it.
How do I get scrap metal pick up near me?
Fill in the quote form with the metals, a rough weight, a few photos and the city, or call (562) 685-9090. We come to you anywhere in Southern California, and the pickup is free.
Will you take a load with some steel in it?
We buy the nonferrous metal in it, not the iron or steel. We do not buy iron, steel or catalytic converters, so pull steel brackets, bolts and inserts off where you can and tell us what is left in the pile.
What ID will I need when you come?
A valid driver's license or state-issued ID card. For copper, brass, bronze and aluminum, California's nonferrous rules also call for a copy of an ID with your photo and address, a photo of you and the metal, and a thumbprint. A business seller can be outside those rules when the buyer has its business details and the driver's license of whoever hands the metal over; the law guide lists them.
Do you pick up scrap metal in Riverside?
Yes, and anywhere else in Southern California, including the rest of the Inland Empire and Los Angeles, Orange, San Diego, Ventura and Imperial counties. The pickup is free there too, and the quote comes from your photos.
Keep reading

How selling works
Photos, a quote, a pickup, and California's rules
Read it
Scrap metal prices
What sets the price per pound, metal by metal
Read it
California scrap metal law for sellers
ID, photos, thumbprints and the third-business-day rule
Read it
Keeping alloy scrap separate
For machine shops: bins, turnings and solids
Read it
Metals we buy
Every metal except iron and steel, exotics and alloys first
Read itHave metal to sell?
Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.