Home › Metals we buy › Inconel
Inconel scrap, from 718 turnings to retired turbine parts
We buy Inconel scrap in the forms a shop or plant makes: 600, 625 and 718 solids, turnings and sheet trim, plus Waspaloy, Rene, Nimonic and the other nickel superalloys. Tell us the alloy, send photos through the quote form, and we come to you with a free pickup anywhere in Southern California.

What Inconel is, alloy by alloy
Inconel is a family of nickel-chromium alloys made to stand up to heat and corrosion. A 2009 USGS circular files it with the superalloys, which keep most of their strength even after long exposure above 650 C (1,200 F).
| Alloy | Limiting composition, percent (Special Metals) | Typical uses |
|---|---|---|
| 600 | Nickel plus cobalt 72.0 min, chromium 14.0-17.0, iron 6.00-10.00 | Lockwire, exhaust liners, turbine seals |
| 625 | Nickel 58.0 min, chromium 20.0-23.0, molybdenum 8.0-10.0, niobium plus tantalum 3.15-4.15 | Transition liners, turbine seals, reaction vessels, valves |
| 718 | Nickel plus cobalt 50.00-55.00, chromium 17.00-21.00, niobium plus tantalum 4.75-5.50, iron the balance | Gas turbine rings, casings and sheet parts, rocket parts |
Read across the rows: 625 carries far more molybdenum, and 718 runs iron as its balance and more niobium. 625 needs no precipitation hardening; 718 is age hardenable. A 2004 USGS report calls 718 the most important niobium-bearing superalloy, at about 5 percent niobium.
We buy the other nickel superalloys too: Waspaloy, Nimonic 90 and X-750 from gas turbine and rocket parts, and alloys known by the Rene and Udimet names. USGS notes that Inconel is a registered trademark of Special Metals Corporation and Waspaloy of Haynes International; the names here describe the metal only.
Sources: USGS Circular 1196-Z, Nickel Recycling in the United States in 2004; Special Metals, Inconel alloy 600 bulletin; Special Metals, Inconel alloy 625 bulletin; Special Metals, Inconel alloy 718 bulletin; USGS Circular 1196 A-M, niobium chapter (2004); Haynes International, Waspaloy datasheet; Special Metals, Nimonic alloy 90 bulletin; Special Metals, Inconel alloy X-750 bulletin.
Where Southern California's Inconel scrap starts
Follow the engines. USGS says nickel-base superalloys such as 718 can make up about 40 to 50 percent of a jet engine's weight (a 2004 study), and California EDD counted 53,000 jobs in aerospace product and parts manufacturing in Los Angeles County in September 2026.
Making those parts throws off most of the metal. USGS's buy-to-fly ratio, metal bought against finished-part weight, ran from under 5 to 1 to over 20 to 1 for superalloys and averaged about 7 to 1 in 1998: six of every seven pounds bought left the shop as something other than the part.
That new scrap comes as solids (bar ends, forgings, trim, rejected parts), turnings (the chips off a lathe or mill) and grindings, and USGS says turnings are the largest by volume. Old scrap is used turbine blades and other engine parts. Scrapped parts also become engine revert, which USGS calls "a high-quality, lower cost superalloy meltstock": alloy scrap known and clean enough to go back into a melt.
Sources: USGS Mineral Commodity Summaries 2026, rhenium; USGS Circular 1196 A-M, superalloy and niobium chapters (2004); USGS Circular 1196-R, tungsten recycling (2011); California EDD, Los Angeles County current employment statistics.
Sort Inconel by alloy, and turnings apart from solids
Sorting is where an Inconel lot holds its value. USGS found that about 70 percent of the superalloy scrap processed worldwide in 1996 went back into the same alloy and about 20 percent was downgraded. Same-alloy recycling starts with a known alloy.
Keep 600, 625 and 718 in separate drums or gaylords (pallet-size cardboard bins), turnings apart from solids, and write the alloy on each from the traveler or cert the day the job runs. Drain coolant-soaked turnings, and keep steel chips, tool bits and floor sweepings out.
A magnet will not sort them. Special Metals lists permeabilities of 1.010 for 600, 1.0006 for 625 and 1.0011 to 1.0013 for 718, and HyperPhysics explains that values that close to 1 belong to materials with almost no magnetic response. More in keeping alloy scrap separate and how to identify scrap metal.
Sources: USGS Circular 1196 A-M, superalloy chapter (2004); Special Metals, Inconel alloy 600 bulletin; Special Metals, Inconel alloy 625 bulletin; Special Metals, Inconel alloy 718 bulletin; HyperPhysics, Georgia State University: magnetic properties.
Inconel scrap price: why it is quoted lot by lot
No Inconel price is posted here: the number belongs to the lot, not the alloy's name. We quote each lot from its photos, alloy, form, cleanliness and weight, and these move it most:
- Proof of alloy. A drum of 718 with its cert, heat number or part number can be quoted as 718. The same chips with no paperwork can only be quoted as what they can be shown to be.
- Form. Solids and clean trim are easy to identify and carry no coolant; turnings and grindings carry oil and fines.
- Attachments. Steel bolts, brackets and inserts on an assembly are not Inconel, and we do not buy iron or steel.
Selling Inconel to us, and what California asks
Send a photo of each drum, tote or gaylord, a close-up of a typical piece and any tag or cert, plus a rough weight per alloy and where the metal sits. Use the quote form, email help@socalscrapmetalbuyer.com or call (562) 685-9090.
Pickup is free, anywhere in Southern California, including Los Angeles, Orange, Riverside, San Bernardino, San Diego, Ventura and Imperial counties. No iron, no steel: fixtures, tooling and steel racks stay with you.
California's junk-dealer law reaches "all ferrous and nonferrous scrap metals and alloys", so its record rules apply to Inconel: the buyer records the seller's name and an ID such as a driver's license, a description of the material and a statement of ownership. A 2025 law, AB 476, expanded that record; the Senate Public Safety Committee describes it adding the weight, the time and a signed seller statement.
The extra steps in Bus. & Prof. Code 21608.5, such as a seller photo and a thumbprint, are written for nonferrous material, which that section defines as copper, copper alloys, stainless steel or aluminum. Our California scrap metal law guide covers both.
Sources: California Attorney General, Information Bulletin 2025-DLE-12; Senate Public Safety Committee, AB 476 analysis (2025); Assembly Business and Professions Committee, 2025 legislative summary; California Attorney General, Secondhand Dealer and Pawnbroker Laws (2012); AB 1508, Chapter 531, Statutes of 2012 (Bus. & Prof. Code 21608.5).

Common questions
Do you buy Inconel turnings and grindings, or only solids?
All of it: turnings, grindings, solids, sheet trim, bar ends and retired parts. Keep each form in its own drained, labeled container.
Is the Inconel 625 scrap price the same as 718's?
Not necessarily. They are different alloys with different amounts of nickel, molybdenum, niobium and iron, so each gets its own quote. List them as separate lines on the quote form.
How can I tell 625 from 718 once the parts are off the machine?
By paperwork: the traveler, cert, heat number or part number, since a magnet ignores both. If the paperwork is gone, say so on the quote form and bin that metal by itself.
Will you pick up Inconel from an aerospace shop in Orange or San Diego County?
Yes. We pick up anywhere in Southern California, and the pickup is free. Mention any loading dock or stairs when you ask.
Keep reading

Hastelloy, Monel and nickel alloys
Hastelloy, Monel, Waspaloy, Incoloy and pure nickel
See what we take
Cobalt alloys
Stellite and other cobalt-chrome scrap
See what we take
Titanium
Solids, turnings and sheet, CP grades and 6Al-4V
See what we take
Keeping alloy scrap separate
For machine shops: bins, turnings and solids
Read it
How to identify scrap metal
A magnet, your eyes and the weight in your hand
Read it
Pickup in Southern California
We come to you anywhere in Southern California
Read itHave metal to sell?
Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.