Call (562) 685-9090

Home › Scrap metal prices

Scrap metal prices, and what actually sets them

Scrap metal prices are set lot by lot: by the alloy and grade, the form it is in, how clean it is, what is attached to it and how much there is, against metal markets that move. We don't post a price list; we quote your lot from its photos.

A floor scale with a box of sorted brass and copper scrap on it

Why this page has no price list

A price list answers the wrong question. What matters is what your lot is worth, and that turns on things a list can't see: which alloy it is, whether it is solids or turnings, how much oil, dirt and steel came with it, and how much of it there is.

So every lot gets its own quote, from its photos. Send a wide shot, close-ups of tags and stamps, and a rough weight through the quote form. To sort first, the copper grades guide and brass vs bronze show where the lines fall.

The metal markets under every quote

Scrap follows the market for the metal inside it, and in 2025 several of those markets moved hard. USGS reports that after China put export controls on selected tungsten items in February 2025, tungsten prices rose sharply through the year: the Rotterdam price of APT went from $331 to $675 per metric ton unit during 2025. APT, ammonium paratungstate, is the main high-purity intermediate for most tungsten products (ITIA).

Cobalt had the opposite problem: in February 2025 Congo (Kinshasa) temporarily banned cobalt exports to deal with oversupply and low prices. China put export controls on molybdenum powders the same month. And the value of US tantalum waste and scrap imports rose 40 percent in 2025 over 2024.

None of those figures is a price we pay; they are why each lot gets its own quote when you sell.

Sources: USGS Mineral Commodity Summaries 2026: Tungsten; ITIA, tungsten recycling (newsletter, August 2019); USGS Mineral Commodity Summaries 2026: Cobalt; USGS Mineral Commodity Summaries 2026: Molybdenum; USGS Mineral Commodity Summaries 2026: Tantalum.

Grade, form, cleanliness, attachments and weight

Scrap is described in ReMA's specifications (ReMA was formerly ISRI), where code words such as Barley, Honey and Tense stand for defined grades. ReMA suggests price terms say whether a price is for clean and dry material or for full copper content, and spell out any unit deductions for impurities.

  • Grade. The grade says what a lot may hold. For nickel-bearing alloy scrap with at least 3 percent recovered nickel (Saint), ReMA sets the nickel content by recovery after the buyer's evaluation, minus non-conforming material and contamination.
  • Form. Turnings bring oil and moisture with them. Yellow brass rod turnings (Night) may carry no more than 3 percent free iron, oil or other moisture, and mixed aluminum turnings (Telic) take deductions for fines over 3 percent through a 20 mesh screen and for dirt, free iron, oil and moisture.
  • Cleanliness. Mixed aluminum castings (Tense) allow oil and grease up to 2 percent in total; mixed old alloy sheet (Taint/Tabor) allows 1 percent.
  • Attachments. Aluminum wheels (Troma) have to be free of inserts, steel, wheel weights, valve stems, tires, grease and oil. Yellow brass (Honey) has to be free of iron.
  • Weight. ReMA's terms count a ton as 2,000 pounds unless stated otherwise, and a contract should say whose weights govern settlement.

A lot that doesn't match its description is subject to rejection or downgrade under ReMA's terms, though the buyer is expected to limit a rejection to the part of the shipment that can't be sorted.

Sources: ReMA ISRI Specifications, July 2026.

Exotics first: Inconel, Hastelloy and Monel

With nickel alloys, start with the alloy name: two lookalike pieces can be very different metal. Inconel 718 holds about 5 percent niobium (columbium), per USGS. Hastelloy X is nominally 47 percent nickel, 22 chromium, 18 iron and 9 molybdenum by its datasheet. Monel is nickel-copper at 65 to 70 percent nickel (USGS), and ReMA sets a 60 percent nickel minimum for Monel castings (Lemon, by assay) and for Monel turnings and borings (Lemur, on a dry basis).

Clean, single-alloy scrap can go back into the same alloy: USGS found about 70 percent of the superalloy scrap processed worldwide in 1996 was recycled into the same alloy and about 20 percent was downgraded. Nickel recovered from scrap was about 60 percent of US apparent nickel consumption in 2025, per USGS.

Sources: USGS Circular 1196-A-M, metal recycling flow studies (2004); Hastelloy X alloy datasheet; USGS Circular 1196-Z, nickel recycling (2009); ReMA ISRI Specifications, July 2026; USGS Mineral Commodity Summaries 2026: Nickel.

Titanium, cobalt alloys, tungsten, moly, tantalum and niobium

  • Titanium. Grade comes first. ASTM B265 lists Grades 1 through 4 as unalloyed titanium and Grade 5 as the titanium alloy with 6 percent aluminum and 4 percent vanadium. USGS says new titanium scrap is usually segregated by material specification and melted into a product with the desired chemistry, and US imports of titanium scrap were estimated at 32,000 tons in 2025.
  • Cobalt alloys. About 51 percent of the cobalt used in the US in 2025 went into superalloys, mainly for aircraft gas turbine engines, and purchased scrap supplied 25 percent of estimated US cobalt consumption (USGS). USGS counts Stellites alongside superalloys as specialty alloy scrap.
  • Tungsten. About 60 percent of US tungsten consumption in 2025 went into cemented carbide parts for cutting and wear-resistant uses (USGS). Most new tungsten heavy alloy scrap is high-quality turnings, with powders, floor sweeps and rejected solid parts besides.
  • Molybdenum. USGS describes new moly scrap as pure and alloyed metal and compound scrap from chemical plants and furnaces, fabrication trimmings and unusable fabricated items.
  • Tantalum and niobium. Tantalum is recycled mostly from new scrap made while manufacturing tantalum electronic components and from tantalum-bearing cemented carbide and superalloy scrap. USGS calls scrap recovery specifically for niobium content negligible: niobium mostly comes back when niobium-bearing steels and superalloys are recycled. Pure niobium sheet, rod and wire still get quoted from photos.

Sources: ASTM B265, titanium strip, sheet and plate; USGS Circular 1196-Y, titanium recycling (2010); USGS Mineral Commodity Summaries 2026: Titanium; USGS Mineral Commodity Summaries 2026: Cobalt; USGS Circular 1196-R, tungsten recycling (2011); USGS Mineral Commodity Summaries 2026: Tungsten; USGS Circular 1196-A-M, metal recycling flow studies (2004); USGS Mineral Commodity Summaries 2026: Tantalum; USGS Mineral Commodity Summaries 2026: Niobium.

Copper, brass and aluminum

Copper sells by grade: bare bright, #1 and #2 copper, and light copper, each defined by how clean, uncoated and unalloyed it is, while insulated wire sells on a sample or recovery basis. USGS's 2026 summary puts copper recovered from scrap at about 30 percent of US copper supply, with brass and wire-rod mills taking about 80 percent of it.

Brass and bronze sell as separate grades: yellow brass (Honey) and red brass (Ebony) apart, with manganese bronze and aluminum bronze kept out of yellow brass. Brass vs bronze covers telling them apart.

Aluminum sells by alloy and form. New production extrusion of one alloy, typically 6063, is Tata; mixed castings are Tense, mixed old sheet is Taint/Tabor, wheels are Troma and turnings are Telic. USGS put aluminum recovered from purchased scrap at about 3.6 million tons in 2025, 56 percent from new scrap and 44 percent from old.

Sources: ReMA ISRI Specifications, July 2026; USGS Mineral Commodity Summaries 2026: Copper; USGS Mineral Commodity Summaries 2026: Aluminum.

Legal-for-trade scales in California

A price per pound is only as good as the pound. In California a new type of weighing device must be evaluated and approved by the Department of Food and Agriculture before it is sold or used commercially, and a legal-for-trade device generally needs a Certificate of Approval from the California Type Evaluation Program (CTEP) or a Certificate of Conformance from the National Type Evaluation Program (NTEP).

County weights and measures offices register, inspect and test commercial scales, and the state says to look for a round approval seal showing when a device was last inspected. Businesses operating as weighmasters must be licensed. Under NIST Handbook 44, 2026 edition, a scale used in direct sales has to sit where the customer can read it and watch the weighing, and it has to show zero with nothing on it.

A complaint can go to the state's Division of Measurement Standards or to the county weights and measures office.

Sources: CDFA Division of Measurement Standards, type evaluation (CTEP); CDFA Division of Measurement Standards, weighing devices; CDFA Division of Measurement Standards, weighmasters; CDFA Division of Measurement Standards, complaints; NIST Handbook 44, current (2026) edition; NIST Handbook 44 (2026), General Code; NIST Handbook 44 (2026), Scales Code.

Common questions

Can you give me scrap metal prices near me over the phone?

Call (562) 685-9090 and tell us what you have, or send photos and a rough weight through the quote form. Either way the quote is for your lot, from its alloy, form, cleanliness and weight, and the pickup is free anywhere in Southern California.

Is a copper scrap price the same for pipe and wire?

They are separate codes even at the same level: clean tube is #1 copper solids (Candy) and clean wire is #1 copper wire (Berry), sold together as Berry/Candy, while bare bright and insulated wire have codes of their own. Solder, paint, fittings, the weight and the copper market do the rest.

Is an aluminum scrap price the same for every alloy?

No. One-alloy extrusion, mixed castings, old sheet, wheels and turnings are separate grades, and steel inserts, wheel weights, valve stems, paint, oil and dirt count against a lot. One clean alloy fits a tighter grade than a mix of several.

Why are turnings quoted differently from solids?

Turnings carry cutting oil, moisture and fines, and they are easy to mix, so the trade sells some turnings grades on sample or analysis to avoid disputes. Keep them dry, one alloy per drum, with a note of the material they came off.

Have metal to sell?

Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.

Call nowGet a quote