Home › Guides › Copper scrap grades
Copper scrap grades, from bare bright to insulated wire
By SoCal Scrap Metal Buyer · Updated
Copper scrap grades come from ReMA's specifications: bare bright is Barley, #1 copper is Berry wire and Candy solids, #2 copper is Birch wire and Cliff solids, and insulated wire has codes of its own. Here is what each grade allows, what knocks copper down one, and how to sort yours before you ask for a quote.

Where the copper grade names come from
The names are ReMA's. Its specifications (ReMA was formerly ISRI) exist to "provide a common language for describing the quality and composition of recycled metals", and each grade has a code word, Barley or Birch or Druid, so buyer and seller mean the same thing by it. ReMA writes the grades as No. 1 and No. 2; in the yard they are #1 and #2 copper.
They are guidelines, not law. The parties to a deal may agree variations, and ReMA says any deviation should be agreed and documented in writing. It also recommends naming material by its code or describing it clearly, with any allowed variation, such as a minimum copper content, stated.
For #2 and light copper, ReMA gives the copper content as a nominal figure with a minimum, measured by electrolytic assay.
Sources: ReMA ISRI Specifications, July 2026.
Bare bright copper: Barley
Barley is ReMA's No. 1 bare, uncoated, unalloyed copper wire, the wire the trade calls bare bright. Read the three words literally: no insulation, no coating and no alloy.
Two points stay open between buyer and seller under Barley: the wire gauge, and whether green copper wire or hydraulically compacted material is accepted.
Chopped bare wire has a code of its own. Clove is nodules from #1 bare wire at a minimum of 99 percent copper, with no tin, lead, zinc, aluminum, iron, other metals, insulation or other contamination.
Sources: ReMA ISRI Specifications, July 2026.
#1 copper: Berry wire and Candy solids
#1 copper splits into wire and solids. Berry is clean, untinned, uncoated, unalloyed copper wire and cable with no brittle burnt wire in it, and it must not include copper tubing.
Candy is the solids side: clean, unalloyed, uncoated copper clippings, punchings, bus bars, commutator segments and clean copper tubing. A load of both sells as Berry/Candy, ReMA's combination of #1 wire and heavy copper.
Set Berry beside Barley and the wording shifts: Berry adds cable and the words clean and untinned, and drops the word bare.
Sources: ReMA ISRI Specifications, July 2026.
#2 copper: Birch wire and Cliff solids
#2 copper is miscellaneous unalloyed copper with a nominal 96 percent copper content, minimum 94. Birch is the wire, Cliff is solids and tubing, and a mix of the two is Birch/Cliff.
What #2 still turns away matters as much as what it takes. Birch excludes excessively leaded, tinned or soldered wire, brass and bronze wire, and insulation. Cliff excludes excessively leaded, tinned or soldered scrap, brasses and bronzes, copper tubing with other than copper connections or with sediment, copper wire from burning, and insulation, and it should be reasonably free of ash.
Sources: ReMA ISRI Specifications, July 2026.
Light copper, refinery brass and the grades below
Light copper is Dream: miscellaneous unalloyed copper at a nominal 92 percent, minimum 88, made up of sheet copper, gutters, downspouts, kettles, boilers and similar scrap. ReMA adds a rule that runs upward: anything excluded from Dream is excluded from the higher grades too.
Below that it stops being plain copper. Refinery brass (Drink) must hold at least 61.3 percent copper and no more than 5 percent iron, and takes brass and bronze solids and turnings plus alloyed and contaminated copper scrap. Drove covers copper-bearing skimmings, grindings, ashes, irony brass and copper, residues and slags, and whole or dismantled copper-wound electric motors are Elmo.
Sources: ReMA ISRI Specifications, July 2026.
Insulated copper wire: Druid, Droid and recovery
Insulated wire is graded by the copper inside. Druid is insulated wire whose conductor is #1 bare, uncoated, unalloyed copper (see Barley), no smaller than No. 16 B&S gauge unless the parties agree otherwise. Droid is #2 copper wire (see Birch) with various types of insulation, and whether jelly wire is in the lot is a matter for agreement.
Both sell on a sample or recovery basis: the deal rests on how much copper comes out. The recovery can even sit in the grade name: ReMA's Zeyda 45/3 means about 45 percent copper and up to 3 percent other material.
Chopped #2 wire becomes Cobra: nodules of at least 97 percent copper, with metal impurities capped at 0.50 percent aluminum and 1 percent each of other metals or insulation.
Sources: ReMA ISRI Specifications, July 2026.
What drops copper a grade, and how to sort for it
- Fittings. Cut brass valves and fittings off copper pipe. Tube with other than copper connections is shut out of Cliff, and the brass sells in its own grade.
- Solder, tin and lead. Heavy solder, tinning and lead keep wire out of Birch and solids out of Cliff, and tinned wire never makes Berry. Keep tinned wire in its own bin.
- Burnt wire. Don't burn insulation off. Berry has to be free of brittle burnt wire, and Cliff excludes wire from burning.
- Insulation. Leave it on and sell the wire as insulated, or strip it clean; insulation is on the excluded list for both Birch and Cliff.
- Sediment and ash. Tube with sediment inside is shut out of Cliff, which should also be reasonably free of ash.
Then photograph it: a wide shot of each pile, the cut ends of the wire, any fittings still attached, and a rough weight. Send it for a quote; the pickup is free anywhere in Southern California.
Sources: ReMA ISRI Specifications, July 2026.
Common questions
Does a bare bright copper price cover tinned or enameled wire?
No. Barley, the bare bright grade, is bare, uncoated and unalloyed wire, so an enamel or plated coating keeps wire out of it, and Berry, the #1 copper wire grade, rules out tinned wire by name. Grade comes first in any price, and we quote your wire from photos.
Why does #2 copper carry a copper percentage when #1 copper does not?
ReMA defines #1 copper by what it is: clean, unalloyed, uncoated wire in Berry and solids in Candy. #2 is miscellaneous unalloyed copper, so ReMA pins it down with a nominal copper content and a minimum instead.
Is copper pipe #1 or #2 copper?
Clean copper tube with nothing attached fits #1 copper solids, ReMA's Candy. Tube with brass or other non-copper fittings, heavy solder or sediment inside drops out of #2 copper solids as well, so cut the fittings off and put them with the brass.
Can insulated wire be #1 copper?
Not as Barley or Berry, which are bare or uncoated wire. Insulated wire with #1 copper inside has its own code, Druid, and sells on how much copper it yields, as does Droid, the #2 version.
Keep reading
Have metal to sell?
Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.



