Home › Metals we buy › Hastelloy, Monel and nickel alloys
Nickel alloy scrap: Hastelloy, Monel, Incoloy and pure nickel
We buy nickel alloy scrap from the corrosion side of industry: Hastelloy reactor and heat-exchanger parts, Monel valves, pump shafts and marine fittings, Incoloy furnace parts and pure nickel. Name the alloy if you know it, send photos through the quote form, and the pickup is free anywhere in Southern California.

Hastelloy scrap: C-276, B-3 and X
IMOA splits nickel-based alloys into two classes, corrosion-resistant and high-temperature, and says molybdenum improves the first kind's resistance to reducing acids. The heat alloys have their own page, Inconel scrap. Hastelloy C-276 and B-3 are acid alloys; Hastelloy X works in the heat.
C-276 (UNS N10276) is nickel-chromium-molybdenum, nominally 57 percent nickel, 16 chromium, 16 molybdenum, 5 iron and 4 tungsten. Haynes says it handles both oxidizing and non-oxidizing acids and resists pitting in chlorides, and lists reactors, heat exchangers and columns as typical uses.
B-3 (UNS N10675) is nickel-molybdenum, nominally 65 percent nickel minimum and 28.5 molybdenum, with very high resistance to pure hydrochloric, hydrobromic and sulfuric acids; it goes into reaction vessels for reducing-acid service.
X (UNS N06002) is nominally 47 percent nickel, 22 chromium, 18 iron and 9 molybdenum, used in gas turbine combustor cans, transition ducts, flame holders and tailpipes. USGS notes Hastelloy is a registered trademark of Haynes International.
Sources: IMOA, molybdenum in nickel-based alloys; Haynes International, Hastelloy C-276 datasheet; Haynes International, Hastelloy C-276 brochure H-2002H (2023); Haynes International, Hastelloy B-3 datasheet; Haynes International, Hastelloy X datasheet; USGS Circular 1196-Z, Nickel Recycling in the United States in 2004.
Monel scrap, Incoloy and pure nickel
Monel 400 (UNS N04400) is nickel-copper and hardens only by cold work. Special Metals lists at least 63.0 percent nickel plus cobalt and 28.0 to 34.0 percent copper, with typical uses from valves, pumps and propeller shafts to marine fasteners. K-500 (UNS N05500) adds aluminum and titanium and a controlled heat treatment for strength, and shows up as oil well drill collars, pump shafts, impellers and marine springs.
Cupronickel is the mirror image, a copper alloy at 10 to 30 percent nickel, and a 2009 USGS circular says both families are used largely in marine work. Southern California has that work: the San Diego Regional EDC counts shipbuilding and repair in its manufacturing cluster, beside defense, aerospace and medical devices.
Incoloy 800, nickel-iron-chromium with relatively low nickel, turns up as furnace parts, cracker tubes and heating-element sheathing. Incoloy 825 adds molybdenum, copper and titanium for chemical processing, oil and gas recovery and acid production. Nickel 200 is commercially pure wrought nickel, 99.6 percent.
Sources: Special Metals, Monel alloy 400 bulletin; Special Metals, Monel alloy K-500 bulletin; USGS Circular 1196-Z, Nickel Recycling in the United States in 2004; Copper Development Association, copper alloy families; San Diego Regional EDC, manufacturing; Special Metals, Incoloy alloy 800 bulletin; Special Metals, Incoloy alloy 825 bulletin; Special Metals, Nickel 200 bulletin.
Why a magnet can't sort a nickel bin
Nickel alloys answer a magnet four different ways:
- Nickel 200: Special Metals lists magnetic properties among its useful features.
- Monel 400: its Curie temperature is 70 to 120 F (21 to 49 C), right around room temperature, and Special Metals warns that "some heats will be magnetic at room temperature and others not".
- Monel K-500: virtually nonmagnetic even at quite low temperatures, though heating can leave a magnetic nickel-rich film on the surface.
- Hastelloy C-276: Haynes lists a permeability of 1.0002, and HyperPhysics puts values that near 1 in the weakly responding paramagnetic and diamagnetic classes.
So a pure nickel offcut and a Monel 400 valve body can both pull a magnet while a C-276 elbow and a K-500 shaft ignore it. Sort by stamp, heat number, tag or the job the part came from; how to identify scrap metal and keeping alloy scrap separate have more.
Sources: Special Metals, Monel alloy 400 bulletin; Special Metals, Nickel 200 bulletin; Special Metals, Monel alloy K-500 bulletin; Haynes International, Hastelloy C-276 datasheet; HyperPhysics, Georgia State University: magnetic properties.
Hastelloy, Monel and nickel scrap prices: what the grade decides
We don't post nickel alloy prices; each lot is quoted from its photos, alloy, form, cleanliness and weight. The trade's own grades show why. The ReMA scrap specifications (July 2026 edition) include:
- Aroma, new nickel scrap: at least 99 percent nickel, cobalt at most 0.25 percent, copper at most 0.50 percent.
- Burly, old nickel scrap: at least 98 percent nickel.
- Ideal, old Monel sheet and solids: clean R and K-Monel sheet, plate, pipe, rods, forgings, screen and wire cloth.
- Lemon, Monel castings assaying at least 60 percent nickel.
- Lemur, mixed Monel turnings and borings with at least 60 percent nickel on a dry basis.
- Saint, any nickel-bearing alloy scrap with at least 3 percent recovered nickel, its nickel content set by recovery after the buyer's evaluation, minus non-conforming material and contamination.
The closer a lot matches one named alloy and form, the less of it is guesswork. A mixed, oily or unlabeled lot drifts toward Saint, where only recoverable nickel counts; and since Lemur is figured dry, coolant adds weight but no nickel.
Sources: ReMA ISRI Scrap Specifications Circular, July 2026.
Selling nickel alloys to us, and California's rules
Photograph each alloy's pile with any stamp or tag in view, add a rough weight per alloy and the address, and send it through the quote form or to help@socalscrapmetalbuyer.com, or call (562) 685-9090. Free pickup covers Southern California, such as a plant in Los Angeles County or a boatyard in San Diego County.
We don't buy iron or steel, so strip steel bolts, studs and shells off flanges, valves and heat-exchanger bundles where you can, and photograph the rest as it sits.
California's definition of scrap metals and alloys names nickel outright, so the general junk-dealer record applies: the seller's name and an ID such as a driver's license, a description with any visible identification numbers, and a statement of ownership. The stricter Bus. & Prof. Code 21608.5 applies to nonferrous material, which it defines as copper, copper alloys, stainless steel or aluminum; the text does not say whether a nickel-copper alloy such as Monel counts as a copper alloy. See California scrap metal law for sellers.
Sources: California Attorney General, Information Bulletin 2025-DLE-12; AB 1508, Chapter 531, Statutes of 2012 (Bus. & Prof. Code 21608.5).
Common questions
How is a Monel scrap price worked out?
From the lot itself. Monel 400 solids, K-500 shafting, castings and mixed turnings are different lots, each quoted from its photos, form, cleanliness and weight, so list them as separate lines on the quote form.
Do you buy Hastelloy turnings and heat-exchanger tubing?
Yes. Keep C-276, B-3 and X apart, drain the turnings, and photograph tube bundles as they sit, shell and all, so the quote can account for what is attached.
Can Hastelloy and Monel share a bin?
Better not. Mixed, the lot can only be graded on the nickel that can be recovered from it; sorted, each alloy is quoted as itself.
Is pure nickel scrap magnetic?
Yes. Nickel 200 pulls a magnet, Monel 400 sometimes does, and C-276 and K-500 barely react, which is why a magnet can't sort a mixed nickel bin.
Keep reading

Inconel
Inconel 600, 625, 718 and other nickel superalloys
See what we take
Cobalt alloys
Stellite and other cobalt-chrome scrap
See what we take
Copper
Bare bright, #1 and #2 copper, pipe and turnings
See what we take
Keeping alloy scrap separate
For machine shops: bins, turnings and solids
Read it
How to identify scrap metal
A magnet, your eyes and the weight in your hand
Read it
California scrap metal law for sellers
ID, photos, thumbprints and the third-business-day rule
Read itHave metal to sell?
Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.