Home › Guides › Brass vs bronze
Brass vs bronze: copper-zinc, copper-tin and the scrap grades between
By SoCal Scrap Metal Buyer · Updated
Brass vs bronze comes down to what was added to the copper: brass is mainly copper and zinc, bronze is mainly copper with tin or another element such as aluminum or silicon. Scrap blurs the line, so here are the definitions, the grade names, how to tell pieces apart, and why the sort matters when you get a quote.

The definitions: copper-zinc against copper-tin
The Copper Development Association (CDA) names brass (copper-zinc), bronze (copper-tin) and copper-nickel as the best-known copper alloy families. Its longer version: brasses are mainly copper and zinc, and bronzes are mainly copper with alloying elements such as tin, aluminum, silicon or beryllium.
Rice University's chemistry notes describe brass as a substitutional alloy of copper with zinc in the lattice where bronze has tin, and say brass is more malleable than bronze and melts at a lower temperature.
Names don't always follow the chemistry. CDA points out that "statuary bronze is technically a brass with a tin content of less than 10 percent and an admixture of zinc and lead."
Sources: Copper Development Association, Copper Is; Copper Development Association, copper facts; Rice University ChemArt, metals and alloys.
The UNS numbers: where brass ends and bronze begins
In the Unified Numbering System, CDA lists the wrought brasses from C20000 to C49999: copper-zinc alloys (the yellow brasses) at C20000 to C29999, copper-zinc-lead (leaded brasses) at C30000 to C39999, and copper-zinc-tin (tin brasses) at C40000 to C49999.
The wrought bronzes begin with the copper-tin-phosphorus alloys, the phosphor bronzes, at C50000 to C52999. Copper-aluminum alloys, the aluminum bronzes, are C60800 to C64699, and C64700 to C66199 holds the copper-silicon alloys that CDA labels silicon bronzes and silicon brasses, both names at once.
Cast tin bronzes are C90200 to C91700 and leaded tin bronzes C92200 to C94500. CDA says lead goes into tin bronzes for machinability and pressure tightness, and that tin bronzes are used in bearings, gears, piston rings, valves and fittings. One number worth knowing: C36000, Copper Alloy 360, a leaded yellow brass that CDA calls the benchmark standard for machinability.
Sources: CDA datasheet, wrought brasses (May 2026); CDA datasheet, wrought bronzes (May 2026); Copper Development Association, copper-tin alloys; Copper Development Association, copper facts.
Yellow brass is Honey, red brass is Ebony
ReMA's specifications grade yellow and red brass under code words. Honey is mixed yellow brass solids: brass castings, rolled brass, rod brass, tubing and miscellaneous yellow brasses, plated brass included. It has to be free of manganese bronze, aluminum bronze, unsweated radiators or radiator parts, iron, excessively dirty and corroded material, and munitions of any kind, bullet casings included.
Ebony, which ReMA titles composition or red brass, is red brass scrap, valves, machinery bearings and other machinery parts, including castings of copper, tin, zinc and/or lead. No piece may measure more than 12 inches over any one part or weigh over 100 pounds unless both sides agree, and Ebony has to be free of semi-red brass castings, which run 78 to 81 percent copper.
Notice the tin. The trade calls Ebony a brass, yet it takes castings with tin in them, the element CDA puts with the bronzes.
Sources: ReMA ISRI Specifications, July 2026; Copper Development Association, copper facts.
The rest of the family in ReMA's specifications
- Night, yellow brass rod turnings: no more than 3 percent free iron, oil or other moisture, no grindings or babbitts, and limits of 0.30 percent tin and 0.15 percent alloyed iron.
- Nomad, yellow brass turnings: sold subject to sample or analysis, to avoid disputes.
- Melon, brass pipe: no plated or soldered material and no pipe with cast brass connections.
- Grape, cocks and faucets: mixed clean red and yellow brass, chrome- or nickel-plated pieces included, at least 35 percent semi-red, with no gas cocks, beer faucets or aluminum and zinc die-cast material.
- Engel, machinery or hard brass solids: at least 75 percent copper, at least 6 percent tin, and 6 to 11 percent lead.
- Parch, manganese bronze solids: at least 55 percent copper, no more than 1 percent lead, and no aluminum bronze or silicon bronze.
- Eland (high-grade, low-lead bronze and brass solids) is recommended to be sold by analysis, Elias (high-lead bronze solids and borings) on sample or analysis, and Ebulent covers lead-free scrap castings alloyed with copper, tin, bismuth and zinc.
Sources: ReMA ISRI Specifications, July 2026.
How to tell brass from bronze at the scrap pile
Start the way sorters do. USGS describes a first sort by shape, object recognition, color and weight, followed where needed by a magnet, the spark pattern an alloy throws on a grinding wheel, or chemical and physical analysis.
- Color. The grade names say it: yellow brass and red brass. Judge color on a clean spot, not on the tarnish.
- What the part is. ReMA files valves and machinery bearings under red brass, faucets under Grape and brass pipe under Melon, and CDA lists bearings, gears, piston rings, valves and fittings among tin bronze uses.
- A magnet. Use it to find the steel: screws, inserts, pins and clamps. OSHA notes that ferrous metals are magnetic, and Honey has to be free of iron.
- Paperwork. If a tag, drawing or invoice gives a UNS number, the ranges above tell you the family.
- When you can't tell. Bin it separately and photograph it. ReMA itself recommends selling some bronze and brass solids by analysis.
Sources: USGS Circular 1196-A-M, metal recycling flow studies (2004); ReMA ISRI Specifications, July 2026; Copper Development Association, copper-tin alloys; OSHA 3348, metal scrap recycling (2008).
Why the sort matters when you sell
Each family sells as its own grade, and each grade lists what it won't take: Honey shuts out manganese bronze and aluminum bronze, Ebony shuts out semi-red castings, and Parch shuts out aluminum and silicon bronze. Under ReMA's terms a shipment that doesn't match its description is subject to rejection or downgrade, though the buyer should limit a rejection to the part that can't be sorted.
At the sale, California doesn't split them. Brass and bronze are copper alloys, and section 21608.5 of the Business and Professions Code defines nonferrous material as copper, copper alloys, stainless steel or aluminum, so its ID copy, photo, thumbprint and payment-timing rules reach both. The California law guide has the details.
Sort into yellow brass, red brass, plated faucets and turnings, pull the steel, and send photos. The pickup is free anywhere in Southern California.
Sources: ReMA ISRI Specifications, July 2026; AB 1508, Chapter 531, Statutes of 2012 (chaptered text); Copper Development Association, Copper Is.
Common questions
Is red brass a brass or a bronze?
The trade calls it brass. ReMA's red brass grade, Ebony, takes castings of copper, tin, zinc and lead, and tin is the element CDA's definitions pair with bronze, so it sits between the two. Sell it as red brass and keep it apart from yellow.
Is aluminum bronze a kind of brass?
No. CDA counts aluminum among the elements that make a copper alloy a bronze and lists the copper-aluminum alloys as aluminum bronzes. In scrap it has to stay out of yellow brass: ReMA's Honey grade shuts it out by name.
Are chrome-plated brass faucets yellow brass?
They have a grade of their own. Grape, the cocks-and-faucets grade, mixes red and yellow brass and allows chrome or nickel plating. Pull gas cocks, beer faucets and die-cast handles out first.
Can brass and bronze turnings share a drum?
Keep them apart. Yellow brass turnings have grades of their own, and the trade sells them on sample or analysis to avoid disputes over what is in the drum. One alloy per drum, kept dry, with a note of what it came off.
Have metal to sell?
Send a few photos and a rough weight for a quote. Free pickup anywhere in Southern California. Every metal except iron and steel.



